| YaBB 2.6.12 Converter | |
|
|
|
- Conversion can take a long time depending on the size of your forum (30 seconds to a couple hours). - Your browser will be refreshed automatically every $max_process_time seconds and you will see the ongoing process in the status bar. - Some internet connections refresh their IP-Address automatically every 24 hours. Make sure that your IP-Address will not change during conversion, or you must restart the conversion after that! - Your forum will be set to maintenance while converting. Click on 'Members' in the menu to start. |
| YaBB 2.6.12 Converter | |
|
|
Member Conversion.
$ConvDone
Board and Category Conversion.
$ConvNotDone
Message Conversion.
$ConvNotDone
Date & Time Conversion.
$ConvNotDone
Final Cleanup.
$ConvNotDone
|
|
|
New User data files have been created. Password encryption is done for each user the first time he/she logs in. You are converting ~ . int( ( $INFO{'st'} + 60 ) / 60 ) . qq~ minutes. Click on 'Boards & Categories' in the menu to continue. |
|
Member(s) with illegal username(s) were found and converted to legal name(s). You can find this information in the Variables/fixusers.txt file. If you do not need it, you can delete it later. |
||||
| Invalid name | Fixed name | Reg. date | Displayed name | |
| $inname | $fxname | $rgdate | $dspname | $tmail |
| YaBB 2.6.12 Converter | |
|
|
Member Conversion.
$mwidth %
Board and Category Conversion.
$ConvNotDone
Message Conversion.
$ConvNotDone
Date & Time Conversion.
$ConvNotDone
Final Cleanup.
$ConvNotDone
|
|
|
To prevent server time-out due to the amount of members to be converted, the conversion is split into more steps. The time-step (\$max_process_time) is set to $max_process_time seconds. The last step took ~ . ( $time_to_jump - $INFO{'starttime'} ) . q~ seconds. You are converting ~ . int( ( $INFO{'st'} + 60 ) / 60 ) . q~ minutes. There are ~ . int( $INFO{'mtotal'} - ( ( $INFO{'mstart2'} + $INFO{'mstart1'} ) / 2 ) ) . qq~/$INFO{'mtotal'} Members left to be converted. If nothing happens in 5 seconds click here to continue... |
| YaBB 2.6.12 Converter | |
|
|
Member Conversion.
$ConvDone
Board & Category Conversion.
$ConvDone
Message Conversion.
$ConvNotDone
Date & Time Conversion.
$ConvNotDone
Final Cleanup.
$ConvNotDone
|
|
|
New forum.master file has been created. New forum.control file has been created. All dates in files have been converted to timestamps. All threads have been converted. You are converting ~ . int( ( $INFO{'st'} + 60 ) / 60 ) . qq~ minutes. Click on 'Messages' in the menu to continue. Otherwise the script will continue by itself in 5 minutes. |
| YaBB 2.6.12 Converter | |
|
|
Member Conversion.
$ConvDone
Board and Category Conversion.
$bwidth %
Message Conversion.
$ConvNotDone
Date & Time Conversion.
$ConvNotDone
Final Cleanup.
$ConvNotDone
|
|
|
To prevent server time-out due to the amount of boards to be converted, the conversion is split into more steps. The time-step (\$max_process_time) is set to $max_process_time seconds. The last step took ~ . ( $time_to_jump - $INFO{'starttime'} ) . q~ seconds. You are converting ~ . int( ( $INFO{'st'} + 60 ) / 60 ) . q~ minutes. There are ~ . ( $INFO{'btotal'} - $INFO{'bstart'} ) . qq~/$INFO{'btotal'} Boards left to be converted. If nothing happens in 5 seconds click here to continue... |
| YaBB 2.6.12 Converter | |
|
|
Member Conversion.
$ConvDone
Board and Category Conversion.
$ConvDone
Message Conversion.
$ConvDone
Date & Time Conversion.
$ConvNotDone
Final Cleanup.
$ConvNotDone
|
|
|
New style message files have been created. $INFO{'total_threads'} Threads have been converted. $INFO{'total_mess'} Messages have been converted. You are converting ~ . int( ( $INFO{'st'} + 60 ) / 60 ) . qq~ minutes. Click on 'Date & Time' in the menu to continue. |
| YaBB 2.6.12 Converter | |
|
|
Member Conversion.
$ConvDone
Board and Category Conversion.
$ConvDone
Message Conversion.
$bwidth % Date & Time Conversion.
$ConvNotDone
Final Cleanup.
$ConvNotDone
|
|
|
To prevent server time-out due to the amount of messages to be converted, the conversion is split into more steps. The time-step (\$max_process_time) is set to $max_process_time seconds. The last step took ~ . ( $time_to_jump - $INFO{'starttime'} ) . q~ seconds. You are converting ~ . int( ( $INFO{'st'} + 60 ) / 60 ) . qq~ minutes. $INFO{'total_threads'} Threads where converted until now. $INFO{'total_mess'} Messages where converted until now. There are ~ . ( $INFO{'totboard'} - $INFO{'count'} ) . qq~/$INFO{'totboard'} Boards left, to convert the Messages in. There are ~
. ( $INFO{'totmess'} - $INFO{'tcount'} )
. qq~/$INFO{'totmess'} Threads left in the actual Board to be converted.
$mwidth %
If nothing happens in 5 seconds click here to continue... |
| YaBB 2.6.12 Converter | |
|
|
Member Conversion.
$ConvDone
Board & Category Conversion.
$ConvDone
Message Conversion.
$ConvDone
Date & Time Conversion.
$ConvDone
Final Cleanup.
$ConvNotDone
|
|
|
New style timestamps have been created throughout the board. All old style dates have been converted. You are converting ~ . int( ( $INFO{'st'} + 60 ) / 60 ) . qq~ minutes. Click on 'Clean Up' in the menu to continue. |
| YaBB 2.6.12 Converter | |
|
|
Member Conversion.
$ConvDone
Board & Category Conversion.
$ConvDone
Message Conversion.
$ConvDone
Date & Time Conversion.
See info below!
--- % Final Cleanup.
$ConvNotDone
|
|
|
To prevent server time-out due to the amount of Date & Time conversion, the conversion is split into more steps. The time-step (\$max_process_time) is set to $max_process_time seconds. The last step took ~ . ( $time_to_jump - $INFO{'starttime'} ) . q~ seconds. You are converting ~ . int( ( $INFO{'st'} + 60 ) / 60 ) . q~ minutes. There are ~
. ( $INFO{'totalpolls'} - $INFO{'pollfile'} )
. qq~/$INFO{'totalpolls'} Polls left to be converted.
$pollwidth %
There are ~
. ( $INFO{'totalpolled'} - $INFO{'polledfile'} )
. qq~/$INFO{'totalpolled'} Polled-Files left to be converted.
$polledwidth %
If nothing happens in 5 seconds click here to continue... |
The YaBB team would like to thank you for choosing Yet another Bulletin Board for your forum needs. We pride ourselves on the cost (FREE), the features, and the security. Visit http://www.yabbforum.com to view the latest development information, read YaBB news, and participate in community discussions.
Make sure you login to your new forum as an administrator and visit the Admin Center. From there, you can maintain your forum. You'll want to look at all of the settings, membergroups, categories/boards, and security options to make sure they are set properly according to your needs.||||\n~; close $FIRSTMS or croak "cannot close $datadir/$firstmstime.txt"; open $FIRSTMSC, '>', "$datadir/$firstmstime.ctb" or croak 'cannot open 1st CTB'; $msgdat = timeformat( $firstmstime, 1, 'rfc' ); print {$FIRSTMSC} qq~### ThreadID: $firstmstime, LastModified: $msgdat ### 'board',"general" 'replies',"0" 'views',"1" 'lastposter',"admin" 'lastpostdate',"$firstmstime" 'threadstatus',"0" 'repliers',"$firstmstime|admin|0"~; close $FIRSTMSC or croak 'cannot close 1st CTB'; open $FIRSTBRD, '>>', "$boardsdir/general.txt" or croak 'cannot open 1st msg'; print {$FIRSTBRD} qq~$firstmstime|Welcome to your New YaBB 2.6 Forum!|Administrator|$initmail|$firstmstime|0|admin|xx|0\n~ or croak 'cannot print 1st msg'; close $FIRSTBRD or croak 'cannot close 1st msg'; $yySetLocation = qq~$set_cgi?action=cleanup2;st=~ . int( $INFO{'st'} + time() - $time_to_jump + $max_process_time ) . qq~;starttime=$time_to_jump;clean=1;pass_error=1;total_boards=~ . @allboards; redirectexit(); } if ( $INFO{'clean'} == 1 ) { MyReCountTotals(); } if ( $INFO{'clean'} == 2 ) { MyMemberIndex(); } if ( $INFO{'clean'} == 3 ) { MyMailNotify(); } if ( $INFO{'clean'} == 4 ) { FixNopost(); } if ( $INFO{'tmp_firstforum'} > $INFO{'firstforum'} ) { $setforumstart = timeformat( $INFO{'tmp_firstforum'} ); $firstmember = timeformat( $INFO{'firstforum'} ); $forumstarttext = qq~The Forum Start date was set to $setforumstart but the first member was registered $firstmember. So we changed the Forum Start Date to $firstmember.~; } $yytabmenu = $NavLink1 . $NavLink2 . $NavLink3 . $NavLink4 . $NavLink5 . $NavLink6a; $formsession = cloak("$mbname$username"); if ( -e "$convmemberdir/admin.dat" ) { $convtext .= q~
After you have tested your forum and made sure everything was converted correctly you can go to your Admin Center and delete /Convert/Boards, /Convert/Members, /Convert/Messages and /Convert/Variables folders and their contents.~; } if ( -e "$vardir/fixusers.txt" ) { $convtext .= qq~
There were some illegal user IDs. These have been changed. Please inform those users of these changes. You can find the list in the $vardir/fixusers.txt~; } $yymain = qq~
| YaBB 2.6.12 Converter | |
|
|
Member Conversion.
$ConvDone
Board and Category Conversion.
$ConvDone
Message Conversion.
$ConvDone
Date & Time Conversion.
$ConvDone
Final Cleanup.
$ConvDone
|
|
|
$forumstarttext
$convtext The conversion took ~ . int( ( $INFO{'st'} + 60 ) / 60 ) . qq~ minutes. We recommend you delete the file "$ENV{'SCRIPT_NAME'}". This is to prevent someone else running the converter and damaging your files. Further more, we strongly recommend to run the following "Maintenance Controls" in the "Admin Center" before you start doing other things: - Rebuild Message Index - Recount Board Totals - Rebuild Members List - Recount Membership - Rebuild Members History - Rebuild Notifications Files - Clean Users Online Log - Attachment Functions => Rebuild Attachments You may now log in to your forum. If your old forum had Extended Profiles installed, you should turn on Extended Profiles in Admin Center -> Forum Settings -> Members and run the Extended Profiles converter from Admin Center -> Profile Fields. Enjoy using YaBB 2.6.12! |
| YaBB 2.6.12 Converter | |
|
|
Member Conversion.
$ConvDone
Board & Category Conversion.
$ConvDone
Message Conversion.
$ConvDone
Date & Time Conversion.
$ConvDone
Final Cleanup.
See info below!
--- %
|
|
|
To prevent server time-out due to the amount to Clean Up, the Cleanup is split into more steps. The time-step (\$max_process_time) is set to $max_process_time seconds. The last step took ~ . ( $time_to_jump - $INFO{'starttime'} ) . q~ seconds. You are converting ~ . int( ( $INFO{'st'} + 60 ) / 60 ) . qq~ minutes. There are 0/$INFO{'total_boards'} Boards (1) left to be recounted.
100 %
There are ~
. ( $INFO{'total_re_tot'} - $INFO{'my_re_tot'} )
. qq~/$INFO{'total_re_tot'} Boards (2) left to be recounted.
$re_tot_width %
There are ~
. ( $INFO{'total_memb'} - $INFO{'memb_index'} )
. qq~/$INFO{'total_memb'} Members left to be recounted.
$memb_index_width %
There are ~
. ( $INFO{'total_mail_n'} - $INFO{'my_mail_n'} )
. qq~/$INFO{'total_mail_n'} Notifications left to be written new.
$mail_not_width %
There are ~
. ( $INFO{'total_nopost'} - $INFO{'fix_nopost'} )
. qq~/$INFO{'total_nopost'} NoPost-Membergroups left to be updated.
$nopost_width %
If nothing happens in 5 seconds click here to continue... |
/
/igsm; } my @location = split /,|\|/xsm, $settings[15]; shift @location; %{ $uid . $fixeduser } = ( 'password' => "$settings[0]", 'realname' => "$settings[1]", 'email' => "$settings[2]", 'webtitle' => "$settings[3]", 'weburl' => ( ( $settings[4] && $settings[4] !~ m{\Ahttps?://}sm ) ? 'http://' : q{} ) . $settings[4], 'signature' => "$settings[5]", 'postcount' => "$settings[6]", 'position' => "$settings[7]", 'icq' => "$settings[8]", 'aim' => "$settings[9]", 'yim' => "$settings[10]", 'gender' => "$settings[11]", 'usertext' => "$settings[12]", 'userpic' => "$settings[13]", 'regdate' => "$settings[14]", 'regtime' => "$regitime", 'location' => join( ', ', grep { $_ } @location ), 'bday' => "$settings[16]", 'timeselect' => "$settings[17]", 'timeoffset' => "$timeoffset", 'hidemail' => ( $settings[19] ? 1 : 0 ), 'gtalk' => "$settings[32]", 'template' => "$new_template", 'language' => "$language", 'lastonline' => "$lastonline", 'lastpost' => "$lastpost", 'lastim' => "$lastim", 'im_ignorelist' => "$pmignorelist", 'notify_me' => "$pmnotify", 'im_popup' => ( $pmpopup ? 1 : 0 ), 'im_imspop' => ( $pmspop ? 1 : 0 ), 'cathide' => "$settings[30]", 'postlayout' => ( $settings[31] ? "$settings[31]|0" : q{} ), 'dsttimeoffset' => "$dstoffset", 'pageindex' => '1|1|1', 'lastips' => "$c_ip_one|$c_ip_two|$c_ip_three", ); UserAccount( $fixeduser, 'update' ); open $FIXUSER, '>>', "$vardir/fixusers.txt" || setup_fatal_error( "$maintext_23 $vardir/fixusers.txt: ", 1 ); print {$FIXUSER} "$user|$fixeduser|$settings[14]|$settings[1]|$settings[2]\n" or croak 'cannot print FIXUSER'; close $FIXUSER or croak 'cannot close FIXUSER'; if ( $fixeduser ne $username ) { undef %{ $uid . $fixeduser }; } return; } sub MyUpdateUser { my ($user) = @_; open $LOADOLDUSER, '<', "$convmemberdir/$user.dat" || setup_fatal_error( "$maintext_23 $convmemberdir/$user.dat: ", 1 ); my @settings = <$LOADOLDUSER>; close $LOADOLDUSER or croak 'cannot close LOADUSER'; for my $set (@settings) { $set =~ s/[\r\n]//gsm; } chomp @settings; my ( $pmignorelist, $pmnotify, $pmpopup, $pmspop ); if ( -e "$convmemberdir/$user.imconfig" ) { open $PMUSER, '<', "$convmemberdir/$user.imconfig" || setup_fatal_error( "$maintext_23 $convmemberdir/$user.imconfig: ", 1 ); @pmconfics = <$PMUSER>; close $PMUSER or croak 'cannot close PMUSER'; chomp $pmconfics[0]; chomp $pmconfics[1]; chomp $pmconfics[3]; chomp $pmconfics[5]; $pmignorelist = $pmconfics[0]; $pmnotify = $pmconfics[1] ? 3 : 0; $pmpopup = $pmconfics[3]; $pmspop = $pmconfics[5]; } my ( $lastonline, $lastpost, $lastim ); if ( -e "$convmemberdir/$user.ll" ) { open $LLFILE, '<', "$convmemberdir/$user.ll" || setup_fatal_error( "$maintext_23 $convmemberdir/$user.ll: ", 1 ); ( $lastonline, $lastpost, $lastim ) = <$LLFILE>; close $LLFILE or croak 'cannot close LLFILE'; chomp $lastonline; chomp $lastpost; chomp $lastim; $lastonline =~ s/(\d{1,2}\/\d{1,2}\/\d{2,4}).*?(\d{1,2}\:\d{1,2}\:\d{1,2})/&conv_stringtotime("$1 at $2")/eism; $lastpost =~ s/(\d{1,2}\/\d{1,2}\/\d{2,4}).*?(\d{1,2}\:\d{1,2}\:\d{1,2})/&conv_stringtotime("$1 at $2")/eism; $lastim =~ s/(\d{1,2}\/\d{1,2}\/\d{2,4}).*?(\d{1,2}\:\d{1,2}\:\d{1,2})/&conv_stringtotime("$1 at $2")/eism; } if ( -e "$convmemberdir/$user.yam" ) { open $YAMFILE, '<', "$convmemberdir/$user.yam" || setup_fatal_error( "$maintext_23 $convmemberdir/$user.yam: ", 1 ); my @ipsettings = <$YAMFILE>; close $YAMFILE or croak 'cannot close YAMFILE'; chomp $ipsettings[1]; ( $c_ip_one, $c_ip_two, $c_ip_three ) = split /[|]/xsm, $ipsettings[1]; if ( $c_ip_one eq '0' ) { $c_ip_one = q{}; } if ( $c_ip_two eq '0' ) { $c_ip_two = q{}; } if ( $c_ip_three eq '0' ) { $c_ip_three = q{}; } } $settings[14] = format_timestring( $settings[14] ); $regitime = "$settings[14]"; $regitime =~ s/(\d{2}\/\d{2}\/\d{2,4}).*?(\d{2}\:\d{2}\:\d{2})/&conv_stringtotime("$1 at $2")/eism; if ($default_template) { $new_template = $default_template; } else { $new_template = q~Forum default~; } if ( $settings[1] eq q{} ) { $settings[1] = $user; } if ( $settings[5] ) { $settings[5] =~ s/&&/&&/gxsm; $settings[5] =~ s/\x22/"/gxsm; $settings[5] =~ s/\[size=([+-]?\d)\](.*?)\[\/size\]/ '\[size=' . conv_size($1) . "\]$2\[\/size\]" /igesm; $settings[5] =~ s/
/
/igxsm; } my @location = split /,|\|/xsm, $settings[15]; shift @location; %{ $uid . $user } = ( 'password' => "$settings[0]", 'realname' => "$settings[1]", 'email' => "$settings[2]", 'webtitle' => "$settings[3]", 'weburl' => ( ( $settings[4] && $settings[4] !~ m{\Ahttps?://}sm ) ? 'http://' : q{} ) . $settings[4], 'signature' => "$settings[5]", 'postcount' => "$settings[6]", 'position' => "$settings[7]", 'icq' => "$settings[8]", 'aim' => "$settings[9]", 'yim' => "$settings[10]", 'gender' => "$settings[11]", 'usertext' => "$settings[12]", 'userpic' => "$settings[13]", 'regdate' => "$settings[14]", 'regtime' => "$regitime", 'location' => join( ', ', grep { $_ } @location ), 'bday' => "$settings[16]", 'timeselect' => "$settings[17]", 'user_tz' => 'UTC', 'hidemail' => ( $settings[19] ? 1 : 0 ), 'gtalk' => "$settings[32]", 'template' => "$new_template", 'language' => "$language", 'lastonline' => "$lastonline", 'lastpost' => "$lastpost", 'lastim' => "$lastim", 'im_ignorelist' => "$pmignorelist", 'notify_me' => "$pmnotify", 'im_popup' => ( $pmpopup ? 1 : 0 ), 'im_imspop' => ( $pmspop ? 1 : 0 ), 'cathide' => "$settings[30]", 'postlayout' => "$settings[31]|0", 'pageindex' => '1|1|1', 'lastips' => "$c_ip_one|$c_ip_two|$c_ip_three", ); UserAccount( $user, 'update' ); if ( $user ne $username ) { undef %{ $uid . $user }; } return; } sub groupconvert { require "$convvardir/MemberStats.txt"; my $i = 0; my $z = 1; undef %Post; $Post{'-1'} = qq~$MemStatNewbie|$MemStarNumNewbie|$MemStarPicNewbie|$MemTypeColNewbie|0|0|0|0|0|0~; while ( $MemStat[$i] ) { if ( $MemPostNum[$i] eq 'x' ) { $NoPost{$z} = qq~$MemStat[$i]|$MemStarNum[$i]|$MemStarPic[$i]|$MemTypeCol[$i]|0|0|0|0|0|0~; push @nopostorder, $z; $z++; } else { $Post{ $MemPostNum[$i] } = qq~$MemStat[$i]|$MemStarNum[$i]|$MemStarPic[$i]|$MemTypeCol[$i]|0|0|0|0|0|0~; } $i++; } for my $key ( keys %Group ) { $value = $Group{$key}; $value =~ s/\x27/&\x2339;/gxsm; $Group{$key} = $value; } for my $key ( keys %NoPost ) { $value = $NoPost{$key}; $value =~ s/\x27/&\x2339;/gxsm; $NoPost{$key} = $value; } for my $key ( keys %Post ) { $value = $Post{$key}; $value =~ s/\x27/&\x2339;/gxsm; $Post{$key} = $value; } require Admin::NewSettings; SaveSettingsTo('Settings.pm'); # save %Group, %NoPost and %Post return; } sub memgrpconvert { open $MEMGRP, '<', "$convvardir/membergroups.txt" || setup_fatal_error( "$maintext_23 $convvardir/membergroups.txt: ", 1 ); my @memgrp = <$MEMGRP>; close $MEMGRP or croak 'cannot close MEMGRP'; for my $set (@memgrp) { $set =~ s/[\r\n]//gsm; } chomp @memgrp; $Group{'Mid Moderator'} = 'Forum Moderator|5|starfmod.png|#008080|0|0|0|0|0|0|0'; $Group{'Global Moderator'} = 'Global Moderator|5|stargmod.png|#0000FF|0|0|0|0|0|0|0'; $Group{'Administrator'} = "$memgrp[0]|5|staradmin.png|#FF0000|0|0|0|0|0|0|0"; $Group{'Moderator'} = "$memgrp[1]|5|starmod.png|#008000|0|0|0|0|0|0|0"; $Post{'50'} = "$memgrp[3]|2|stargold.png||0|0|0|0|0|0|0"; $Post{'250'} = "$memgrp[5]|4|stargold.png||0|0|0|0|0|0|0"; $Post{'500'} = "$memgrp[6]|5|starsilver.png||0|0|0|0|0|0|0"; $Post{'100'} = "$memgrp[4]|3|starblue.png||0|0|0|0|0|0|0"; $Post{'-1'} = "$memgrp[2]|1|stargold.png||0|0|0|0|0|0|0"; require Admin::NewSettings; SaveSettingsTo('Settings.pm'); # save %Group and %Post return; } sub ConvertMembers2 { open $MEMDIR, '<', "$convmemberdir/memberlist.txt" || setup_fatal_error( "$maintext_23 $convmemberdir/memberlist.txt: ", 1 ); my @memlist = <$MEMDIR>; close $MEMDIR or croak 'cannot close MEMDIR'; chomp @memlist; for my $i ( ( $INFO{'mstart2'} || 0 ) .. ( @memlist - 1 ) ) { my $user = $memlist[$i]; chomp $user; next if !-e "$convmemberdir/$user.dat"; my $newuser = exists $fixed_users{$user} ? ${ $fixed_users{$user} }[0] : $user; my @xtn = qw(msg ims imstore log outbox); for my $cnt ( 0 .. $#xtn ) { if ( -e "$convmemberdir/$user.$xtn[$cnt]" ) { open $FILEUSER, '<', "$convmemberdir/$user.$xtn[$cnt]" || setup_fatal_error( "$maintext_23 $convmemberdir/$user.$xtn[$cnt]: ", 1 ); my @divfiles = <$FILEUSER>; close $FILEUSER or croak 'cannot close FILEUSER'; if ( $cnt == 0 || $cnt == 2 || $cnt == 4 ) { # msg || imstore || outbox chomp @divfiles; for my $i ( 0 .. $#divfiles ) { if ( $cnt == 2 ) { # imstore my ( $name, $subject, $date, $message, $id, $ip, $read_flag, $folder ) = split /[|]/xsm, $divfiles[$i]; $name = exists $fixed_users{$name} ? ${ $fixed_users{$name} }[0] : $name; $date =~ s/(\d{1,2}\/\d{1,2}\/\d{2,4}).*?(\d{1,2}\:\d{1,2}\:\d{1,2})/conv_stringtotime("$1 at $2")/eism; $message =~ s/
/
/igsm; if ( $folder eq 'outbox' ) { $folder = 'out'; if ( !$read_flag ) { $read_flag = 'u'; } elsif ( $read_flag == 1 ) { $read_flag = 'r'; } $divfiles[$i] = "$id|$newuser|$name|||$subject|$date|$message|$id|0|$ip|s|$read_flag|$folder|\n"; } elsif ( $folder eq 'inbox' ) { $folder = 'in'; if ( $read_flag == 1 ) { $read_flag = 'u'; } elsif ( $read_flag == 2 ) { $read_flag = 'r'; } $divfiles[$i] = "$id|$name|$newuser|||$subject|$date|$message|$id|0|$ip|s|$read_flag|$folder|\n"; } } else { # msg || outbox my ( $name, $subject, $date, $message, $id, $ip, $read_flag ) = split /[|]/xsm, $divfiles[$i]; $name = exists $fixed_users{$name} ? ${ $fixed_users{$name} }[0] : $name; $date =~ s/(\d{1,2}\/\d{1,2}\/\d{2,4}).*?(\d{1,2}\:\d{1,2}\:\d{1,2})/conv_stringtotime("$1 at $2")/eism; $message =~ s/
/
/igsm; if ( $id < 101 || $id eq q{} ) { $id = $date; } if ( $cnt == 0 ) { # msg if ( $read_flag == 1 ) { $read_flag = 'u'; } # u(nread) elsif ( $read_flag == 2 ) { $read_flag = 'r'; } # r(eplied) $divfiles[$i] = "$id|$name|$newuser|||$subject|$date|$message|$id|0|$ip|s|$read_flag||\n"; } else { # outbox if ( !$read_flag ) { $read_flag = 'u'; } # u(rgent) elsif ( $read_flag == 1 ) { $read_flag = 's'; } # s(tandard) $divfiles[$i] = "$id|$newuser|$name|||$subject|$date|$message|$id|0|$ip|s|$read_flag||\n"; } } } } open $FILEUSER, '>', "$memberdir/$newuser.$xtn[$cnt]" || setup_fatal_error( "$maintext_23 $memberdir/$newuser.$xtn[$cnt]: ", 1 ); print {$FILEUSER} @divfiles or croak 'cannot print FILEUSER'; close $FILEUSER or croak 'cannot close FILEUSER'; } } if ( time() > $time_to_jump && ( $i + 1 ) < @memlist ) { $yySetLocation = qq~$set_cgi?action=members2;st=~ . int( $INFO{'st'} + time() - $time_to_jump + $max_process_time ) . qq~;starttime=$time_to_jump;mtotal=~ . @memlist . qq~;mstart1=$INFO{'mstart1'};mstart2=~ . ( $i + 1 ); redirectexit(); } } return; } # / Member Conversion ## # Board + Category Conversion ## sub GetCats { open $VDIR, '<', "$convvardir/cat.txt" || setup_fatal_error( "$maintext_23 $convvardir/cat.txt: ", 1 ); @categoryorder = <$VDIR>; close $VDIR or croak 'cannot close VDIR'; for my $set (@categoryorder) { $set =~ s/[\r\n]//gsm; } chomp @categoryorder; my @allboards; for my $fcat (@categoryorder) { open $VCAT, '<', "$convboardsdir/$fcat.cat" || setup_fatal_error( "$maintext_23 $convboardsdir/$fcat.cat: ", 1 ); @catdata = <$VCAT>; close $VCAT or croak 'cannot close VCAT'; for my $set (@catdata) { $set =~ s/[\r\n]//gsm; } chomp @catdata; $catinfo{$fcat} = qq~$catdata[0]|$catdata[1]|1~; @catboards = (); for my $cnt ( 2 .. $#catdata ) { if ( $catdata[$cnt] ) { push @catboards, $catdata[$cnt]; } } push @allboards, @catboards; $cat{$fcat} = join q{,}, @catboards; } for my $fboard (@allboards) { open $VBRD, '<', "$convboardsdir/$fboard.dat" || setup_fatal_error( "$maintext_23 $convboardsdir/$fboard.dat: ", 1 ); @bdata = <$VBRD>; close $VBRD or croak 'cannot close VBRD'; for my $set (@bdata) { $set =~ s/[\r\n]//gsm; } chomp $bdata[0]; # get board access data if ( -e "$convboardsdir/$fboard.mbo" ) { require "$convboardsdir/$fboard.mbo"; } $board{$fboard} = qq~$bdata[0]|$view_groups{$fboard}|$showprivboards{$fboard}~; } # add trash if not exists if ( !exists $cat{'staff'} ) { push @categoryorder, 'staff'; $cat{'staff'} = 'announcements,recycle'; $catinfo{'staff'} = 'Forum Staff|Administrator, Global Moderator|0'; } else { my @temp; for ( split /,/xsm, $cat{'staff'} ) { if ( $_ ne 'recycle' && $_ ne 'announcements' ) { push @temp, $_; } } push @temp, 'recycle'; push @temp, 'announcements'; $cat{'staff'} = join q{,}, @temp; } if ( !exists $cat{'general'} ) { push @categoryorder, 'general'; $cat{'general'} = 'general'; $catinfo{'general'} = 'General Category||0|'; } else { my @temp; for ( split /,/xsm, $cat{'general'} ) { if ( $_ ne 'general' ) { push @temp, $_; } } push @temp, 'general'; $cat{'general'} = join q{,}, @temp; } if ( !exists $board{'recycle'} ) { $board{'recycle'} = 'Recycle Bin||'; } if ( !exists $board{'announcements'} ) { $board{'announcements'} = 'Global Announcements||'; } if ( !exists $board{'general'} ) { $board{'general'} = 'General Board||1'; } @temparray = (); while ( ( $key, $value ) = each %cat ) { # Strip membergroups with a ~ from them $value =~ s/~//gsm; push @temparray, qq~\$cat{$key} = qq\~$value\~;\n~; } while ( ( $key, $value ) = each %catinfo ) { # Strip membergroups with a ~ from them $value =~ s/~//gxsm; $value =~ s/,/, /gsm; push @temparray, qq~\$catinfo{$key} = qq\~$value\~;\n~; } while ( ( $key, $value ) = each %board ) { # Strip membergroups with a ~ from them $value =~ s/~//gxsm; $value =~ s/,/, /gsm; push @temparray, qq~\$board{'$key'} = qq\~$value\~;\n~; } open $FILE, '>', "$boardsdir/forum.master" || setup_fatal_error( "$maintext_23 $boardsdir/forum.master: ", 1 ); print {$FILE} qq~\$mloaded = 1;\n~, qq~\@categoryorder = qw(@categoryorder);\n~, @temparray, "\n1;" or croak 'cannot print FILE'; close $FILE or croak 'cannot close FILE'; return; } sub CreateControl { require "$boardsdir/forum.master"; for my $foundboard ( keys %board ) { # get category if ( -e "$convboardsdir/$foundboard.ctb" ) { open $CINFO, '<', "$convboardsdir/$foundboard.ctb" or croak "cannot open $convboardsdir/$foundboard.ctb" ; @category = <$CINFO>; close $CINFO or croak "cannot close $convboardsdir/$foundboard.ctb"; for my $set (@category) { $set =~ s/[\r\n]//gsm; } chomp $category[0]; $cntcat = $category[0]; # get boardinfo open $BINFO, '<', "$convboardsdir/$foundboard.dat"; @boardinfo = <$BINFO>; close $BINFO or croak 'cannot close BINFO'; for my $set (@boardinfo) { $set =~ s/[\r\n]//gsm; } chomp @boardinfo; $boardinfo[2] =~ s/^\||\|$//gxsm; $boardinfo[2] =~ s/\|(\S?)/,$1/gxsm; $cntmods = join q{,}, grep { exists $fixed_users{$_} ? ${ $fixed_users{$_} }[0] : $_; } split /,/xsm, $boardinfo[2]; $cntpic = q{}; $cntdescription = $boardinfo[1]; # get board access data if ( -e "$convboardsdir/$foundboard.mbo" ) { require "$convboardsdir/$foundboard.mbo"; } $cntstartperms = "$start_groups{$foundboard}"; $cntreplyperms = "$reply_groups{$foundboard}"; $cntpollperms = q{}; $cntstartperms =~ s/,/, /gsm; $cntreplyperms =~ s/,/, /gsm; $cntpollperms =~ s/,/, /gsm; $cntpic = "$boardpic{$foundboard}"; $cntzero = q{}; $cntpassword = q{}; $cnttotals = q{}; $cntattperms = q{}; $spare = q{}; if ( $cntcat && $foundboard ) { $mypic = q{}; if ($cntpic) { $mypic = 'y'; } push @boardcontrol, "$cntcat|$foundboard|$mypic|$cntdescription|$cntmods|$cntmodgroups|$cntstartperms|$cntreplyperms|$cntpollperms|$cntzero|$cntpassword|$cnttotals|$cntattperms|$spare|||\n"; open $BRDPIC, '>>', "$boardsdir/brdpics.db"; print {$BRDPIC} qq~$foundboard|default|$cntpic\n~; close $BRDPIC or croak 'cannot close BRDPIC'; } } if ( $foundboard eq 'general' && !-e "$convboardsdir/general.txt") { # add general board if not exist push @boardcontrol, qq{general|general||This is the board for General Discussions.
The board description can now hold multiple lines and can use HTML!|admin|||||0||||1|||\n}; open $BOARDFILE, '>', "$convboardsdir/general.txt" || setup_fatal_error( "$maintext_23 $convboardsdir/general.txt: ", 1 ); print {$BOARDFILE} qq{1378046604|Welcome to your new YaBB 2.6.12 forum!|Administrator|webmaster\@yoursite.com|1378046604|0|admin|xx|0\n} or croak 'cannot print BOARDFILE'; close $BOARDFILE or croak 'cannot close BOARDFILE'; } if ( $foundboard eq 'recycle' && !-e "$convboardsdir/recycle.txt") { # add trash if not exists push @boardcontrol, qq{staff|recycle||If the Recycle Bin is turned on, removed topics will be moved to this board. This will allow you to recover them if it is necessary. You should purge messages in this board frequently to keep it clean.|admin|||||1|||1||||\n}; open $BOARDFILE, '>', "$convboardsdir/recycle.txt" || setup_fatal_error( "$maintext_23 $convboardsdir/recycle.txt: ", 1 ); print {$BOARDFILE} q{} or croak 'cannot print BOARDFILE'; close $BOARDFILE or croak 'cannot close BOARDFILE'; } elsif ( $foundboard eq 'announcements' && !-e "$convboardsdir/annoucements.txt" ) { push @boardcontrol, qq{staff|announcements||Topics you place in this board will display as a "Global Announcement" on the top of all other boards. Use this for things such as forum rules, top news articles, or important statements.|admin||Administrator|||0||1|||||\n}; open $BOARDFILE, '>', "$convboardsdir/announcements.txt" || setup_fatal_error( "$maintext_23 $convboardsdir/announcements.txt: ", 1 ); print {$BOARDFILE} q{} or croak 'cannot print BOARDFILE'; close $BOARDFILE or croak 'cannot close BOARDFILE'; } } open $CONTROL, '>', "$boardsdir/forum.control" || setup_fatal_error( "$maintext_23 $boardsdir/forum.control: ", 1 ); @boardcontrol = sort @boardcontrol; print {$CONTROL} @boardcontrol or croak 'cannot print CONTROL'; close $CONTROL or croak 'cannot close CONTROL'; return; } sub ConvertBoards { require "$boardsdir/forum.master"; my %stickies; if ( open $DATADIR, '<', "$convboardsdir/sticky.stk" ) { my @stickies = <$DATADIR>; close $DATADIR or croak 'cannot close stickies file'; chomp @stickies; foreach (@stickies) { $stickies{$_} = 1; } } @boards = sort keys %board; for my $i ( ( $INFO{'bstart'} || 0 ) .. $#boards ) { open $BOARDFILE, '<', "$convboardsdir/$boards[$i].txt" || setup_fatal_error( "$maintext_23 $convboardsdir/$boards[$i].txt: ", 1 ); @boardfile = <$BOARDFILE>; close $BOARDFILE or croak "cannot close $convboardsdir/$boards[$i].txt"; for my $set (@boardfile) { $set =~ s/[\r\n]//gsm; } chomp @boardfile; @temparray = (); for my $j ( ( $INFO{'bfstart'} || 0 ) .. $#boardfile ) { my $line = $boardfile[$j]; $line =~ s/[\r\n]//gsm; chomp $line; my ( $mnum, $msub, $mname, $memail, $mdate, $mreplies, $musername, $micon, $mstate ) = split /[|]/xsm, $line; next if (!-e "$convdatadir/$mnum.txt" || -s "$convdatadir/$mnum.txt" < 35 ); $mname = exists $fixed_users{$mname} ? ${ $fixed_users{$mname} }[1] : $mname; $musername = exists $fixed_users{$musername} ? ${ $fixed_users{$musername} }[0] : $musername; $mdate =~ s/(\d{1,2}\/\d{1,2}\/\d{2,4}).*?(\d{1,2}\:\d{1,2}\:\d{1,2})/&conv_stringtotime("$1 at $2")/eism; $mstate =~ s/1/l/xsm; if ( exists $stickies{$mnum} ) { $mstate .= 's'; } push @temparray, "$mnum|$msub|$mname|$memail|$mdate|$mreplies|$musername|$micon|$mstate\n"; if ( time() > $time_to_jump && ( $j + 1 ) < @boardfile ) { open $BOARDFILE, '>>', "$boardsdir/$boards[$i].txt" || setup_fatal_error( "$maintext_23 $boardsdir/$boards[$i].txt: ", 1 ); for my $set (@temparray) { $set =~ s/[\r\n]//gsm; } print {$BOARDFILE} @temparray or croak 'cannot print BOARDFILE'; close $BOARDFILE or croak 'cannot close BOARDFILE'; $yySetLocation = qq~$set_cgi?action=cats2;st=~ . int( $INFO{'st'} + time() - ( $time_to_jump - $max_process_time ) ) . qq~;starttime=$time_to_jump;bfstart=~ . ( $j + 1 ) . qq~;bstart=$i;btotal=~ . @boards; redirectexit(); } } open $BOARDFILE, '>>', "$boardsdir/$boards[$i].txt" || setup_fatal_error( "$maintext_23 $boardsdir/$boards[$i].txt: ", 1 ); print {$BOARDFILE} @temparray or croak 'cannot print BOARDFILE'; close $BOARDFILE or croak 'cannot close BOARDFILE'; if ( time() > $time_to_jump && ( $i + 1 ) < @boards ) { $yySetLocation = qq~$set_cgi?action=cats2;st=~ . int( $INFO{'st'} + time() - $time_to_jump + $max_process_time ) . qq~;starttime=$time_to_jump;mtotal=~ . @memlist . q~;bfstart=0;bstart=~ . ( $i + 1 ); redirectexit(); } $INFO{'bfstart'} = 0; } return; } # / Board + Category Conversion ## # Message Conversion ## sub ConvertMessages { require "$boardsdir/forum.master"; ${ $uid . $username }{'timeformat'} = 'SDT, DD MM YYYY HH:mm:ss zzz'; # the .ctb time format ${ $uid . $username }{'timeselect'} = 7; my $ctbtime = timeformat( $date, 1, 'rfc' ); my %stickies; if ( open $DATADIR, '<', "$convboardsdir/sticky.stk" ) { my @stickies = <$DATADIR>; close $DATADIR or croak 'cannot close sticky.stk'; chomp @stickies; foreach (@stickies) { $stickies{$_} = 1; } } my @boards = sort keys %board; my $totalbdr = @boards; for my $next_board ( ( $INFO{'count'} || 0 ) .. ( $totalbdr - 1 ) ) { my $boardname = $boards[$next_board]; open $BRDFILE, '<', "$boardsdir/$boardname.txt" || setup_fatal_error( "$maintext_23 $boardsdir/$boardname.txt: ", 1 ); my @brdmessageline = <$BRDFILE>; close $BRDFILE or croak 'cannot close BRDFILE'; my %newreply = (); my $totalmess = @brdmessageline; for my $tops ( ( $INFO{'tcount'} || 0 ) .. ( $totalmess - 1 ) ) { ( $thread, undef, undef, undef, undef, $replies, undef ) = split /[|]/xsm, $brdmessageline[$tops], 7; open $MSGFILE, '<', "$convdatadir/$thread.txt" || setup_fatal_error( "$maintext_23 $convdatadir/$thread.txt: ", 1 ); @messagelines = <$MSGFILE>; close $MSGFILE or croak 'cannot close MSGFILE'; chomp @messagelines; $INFO{'total_mess'} += @messagelines; $INFO{'total_threads'}++; @temparray = (); for my $msgline (@messagelines) { my ( $subject, $name, $email, $mdate, $musername, $icon, $dummy, $user_ip, $message, $ns, $editdate, $editby, undef, $attachment ) = split /[|]/xsm, $msgline; $name = exists $fixed_users{$name} ? ${ $fixed_users{$name} }[1] : $name; $musername = exists $fixed_users{$musername} ? ${ $fixed_users{$musername} }[0] : $musername; $editby = exists $fixed_users{$editby} ? ${ $fixed_users{$editby} }[0] : $editby; if ( $message =~ /\[[qgs]/ixsm ) { # too many RegExpr take too much time!!! $message =~ s/\[quote(\s+author=(.*?)\s+link=(.*?)\s+date=(.*?)\s*)?\](.*?)\[\/quote\]/QuoteFix($2,$3,$4,$5)/eigsm; $message =~ s/\[(glow|shadow)=.*?\](.*?)\[\/(glow|shadow)\]/\[glb\]$2\[\/glb\]/igsm; $message =~ s/\[size=([+-]?\d)\](.*?)\[\/size\]/ '\[size=' . conv_size($1) . "\]$2\[\/size\]" /igesm; } $message =~ s/
/
/igsm; $mdate =~ s/(\d{1,2}\/\d{1,2}\/\d{2,4}).*?(\d{1,2}\:\d{1,2}\:\d{1,2}).*/&conv_stringtotime("$1 at $2")/eism; $editdate =~ s/(\d{1,2}\/\d{1,2}\/\d{2,4}).*?(\d{1,2}\:\d{1,2}\:\d{1,2}).*/&conv_stringtotime("$1 at $2")/eism; push @temparray, "$subject|$name|$email|$mdate|$musername|$icon|$dummy|$user_ip|$message|$ns|$editdate|$editby|$attachment\n"; if ( $musername ne 'Guest' ) { ${ $uid . $thread }{$musername}++; ${ $uid . $thread . 'time' }{$musername} = $mdate; } } open $MSGFILE, '>', "$datadir/$thread.txt" || setup_fatal_error( "$maintext_23 $datadir/$thread.txt: ", 1 ); print {$MSGFILE} @temparray or croak "cannot print $datadir/$thread.txt"; close $MSGFILE or croak 'cannot close MSGFILE'; # do the .ctb my $views = 1; if ( -e "$convdatadir/$thread.data" ) { open $DATA, '<', "$convdatadir/$thread.data" || setup_fatal_error( "$maintext_23 $convdatadir/$thread.data: ", 1 ); $data = <$DATA>; close $DATA or croak 'cannot close DATA'; chomp $data; ( $views, undef ) = split /[|]/xsm, $data, 2; } my $trstate = exists $stickies{$thread} ? 's' : q{}; $lastposter = $musername eq 'Guest' ? "Guest-$name" : $musername; my @msg = split /[|]/xsm, $temparray[-1]; # ($subject|$name|$email|$mdate|$musername|$icon|$dummy|$user_ip|$message|$ns|$editdate|$editby|$attachment) $msgdat = ctbtime($msg[3]); open $CTB, '>', "$datadir/$thread.ctb" || setup_fatal_error( "$maintext_23 $datadir/$thread.ctb: ", 1 ); print {$CTB} qq~### ThreadID: $thread, LastModified: $msgdat ###\n\n'board',"$boardname"\n'replies',"$#messagelines"\n'views',"$views"\n'lastposter',"$msg[4]"\n'lastpostdate',"$msg[3]"\n'threadstatus',"$msg[6]"\n'repliers',""\n~ or croak "cannot print $datadir/$thread.ctb"; close $CTB or croak 'cannot close CTB'; if ( $replies != $#messagelines ) { $newreply{$tops} = $#messagelines; } if ( time() > $time_to_jump && ( $tops + 1 ) < $totalmess ) { writerecentlog( ( $INFO{'tcount'} || 0 ), $totalmess, \@brdmessageline ); if (%newreply) { # fix reply display foreach ( keys %newreply ) { my @temp = split /[|]/xsm, $brdmessageline[$_]; $temp[5] = $newreply{$_}; $brdmessageline[$_] = join q{|}, @temp; } open $BOARDFILE, '>', "$boardsdir/$boardname.txt" || setup_fatal_error( "$maintext_23 $boardsdir/$boardname.txt: ", 1 ); print {$BOARDFILE} @brdmessageline or croak "cannot print $boardsdir/$boardname.txt"; close $BOARDFILE or croak 'cannot close BOARDFILE'; } $yySetLocation = qq~$set_cgi?action=messages2;st=~ . int( $INFO{'st'} + time() - ( $time_to_jump - $max_process_time ) ) . qq~;starttime=$time_to_jump;count=$next_board;tcount=~ . ( $tops + 1 ) . qq~;total_mess=$INFO{'total_mess'};total_threads=$INFO{'total_threads'};totboard=$totalbdr;totmess=$totalmess~; redirectexit(); } } writerecentlog( ( $INFO{'tcount'} || 0 ), $totalmess, \@brdmessageline ); if (%newreply) { # fix reply display foreach ( keys %newreply ) { my @temp = split /[|]/xsm, $brdmessageline[$_]; $temp[5] = $newreply{$_}; $brdmessageline[$_] = join q{|}, @temp; } open $BOARDFILE, '>', "$boardsdir/$boardname.txt" || setup_fatal_error( "$maintext_23 $boardsdir/$boardname.txt: ", 1 ); print {$BOARDFILE} @brdmessageline or croak "cannot print $boardsdir/$boardname.txt"; close $BOARDFILE or croak 'cannot close BOARDFILE'; } if ( time() > $time_to_jump && ( $next_board + 1 ) < $totalbdr ) { $yySetLocation = qq~$set_cgi?action=messages2;st=~ . int( $INFO{'st'} + time() - ( $time_to_jump - $max_process_time ) ) . qq~;starttime=$time_to_jump;count=~ . ( $next_board + 1 ) . qq~;tcount=0;total_mess=$INFO{'total_mess'};total_threads=$INFO{'total_threads'};totboard=$totalbdr;totmess=0~; redirectexit(); } $INFO{'tcount'} = 0; } return; } sub QuoteFix { my ( $qauthor, $qlink, $qdate, $qmessage ) = @_; if ( $qauthor eq q{} || $qlink eq q{} || $qdate eq q{} ) { $quote = "\[quote\]$qmessage\[/quote\]"; } else { $qdate = conv_stringtotime($qdate); ( undef, $threadlink, $start ) = split /;/xsm, $qlink; ( undef, $num ) = split /=/xsm, $threadlink; ( undef, $start ) = split /=/xsm, $start; $quote = "\[quote author=$qauthor link=$num/$start date=$qdate\]$qmessage\[/quote\]"; } return $quote; } sub conv_size { my $size = shift; if ( $size eq '1' || $size eq '-2' ) { $size = 10; } elsif ( $size eq '2' || $size eq '-1' ) { $size = 13; } elsif ( $size eq '3' ) { $size = 16; } elsif ( $size eq '4' || $size eq '+1' ) { $size = 18; } elsif ( $size eq '5' || $size eq '+2' ) { $size = 24; } elsif ( $size eq '6' || $size eq '+3' ) { $size = 32; } elsif ( $size eq '7' || $size eq '+4' ) { $size = 48; } return $size; } sub writerecentlog { my ( $start, $total, $messageref ) = @_; for my $t ( $start .. ( $total - 1 ) ) { ( $thread, undef ) = split /[|]/xsm, ${$messageref}[$t], 2; for my $user ( keys %{ $uid . $thread } ) { open $RLOG, '>>', "$memberdir/$user.rlog" || setup_fatal_error( "$maintext_23 $memberdir/$user.rlog: ", 1 ); print {$RLOG} "$thread\t${$uid.$thread}{$user},${$uid.$thread.'time'}{$user}\n" or croak "cannot print $memberdir/$user.rlog"; close $RLOG or croak 'cannot close RLOG'; } undef %{ $uid . $thread }; undef %{ $uid . $thread . 'time' }; } return; } # / Message Conversion ## # Date Conversion ## sub ConvertTimeToString { if ( $INFO{'timeconv'} < 1 ) { opendir DATADIR, $convdatadir || setup_fatal_error( "Directory: $convdatadir: ", 1 ); my @polls = sort grep { /\.poll$/xsm } readdir DATADIR; closedir DATADIR; my $totalpolls = @polls; for my $i ( ( $INFO{'pollfile'} || 0 ) .. ( $totalpolls - 1 ) ) { $file = $polls[$i]; open $POLLFILE, '<', "$convdatadir/$file" || setup_fatal_error( "$maintext_23 $convdatadir/$file: ", 1 ); @pollsfile = <$POLLFILE>; close $POLLFILE or croak 'cannot close POLLFILE'; chomp $pollsfile[0]; my ( $dummy1, $dummy2, $polluname, $dummy4, $dummy5, $pdate, $dummy6, $dummy7, $dummy8, $epdate, $dummy10, $dummy11 ) = split /[|]/xsm, shift @pollsfile; $polluname = exists $fixed_users{$polluname} ? ${ $fixed_users{$polluname} }[0] : $polluname; $pdate =~ s/(\d{1,2}\/\d{1,2}\/\d{2,4}).*?(\d{1,2}\:\d{1,2}\:\d{1,2})/&conv_stringtotime("$1 at $2")/eism; $epdate =~ s/(\d{1,2}\/\d{1,2}\/\d{2,4}).*?(\d{1,2}\:\d{1,2}\:\d{1,2}).*/&conv_stringtotime("$1 at $2")/eism; open $POLLFILE, '>', "$datadir/$file" || setup_fatal_error( "$maintext_23 $datadir/$file: ", 1 ); print {$POLLFILE} "$dummy1|$dummy2|$polluname|$dummy4|$dummy5|$pdate|$dummy6|$dummy7|$dummy8|$epdate|$dummy10|$dummy11\n", @pollsfile or croak "cannot print $datadir/$file"; close $POLLFILE or croak 'cannot close POLLFILE'; if ( time() > $time_to_jump && ( $i + 1 ) < $totalpolls ) { $yySetLocation = qq~$set_cgi?action=dates2;st=~ . int( $INFO{'st'} + time() - $time_to_jump + $max_process_time ) . qq~;starttime=$time_to_jump;timeconv=0;totalpolls=$totalpolls;pollfile=~ . ( $i + 1 ); redirectexit(); } } $INFO{'totalpolls'} = $totalpolls; } if ( $INFO{'timeconv'} < 2 ) { opendir DATADIR, $convdatadir || setup_fatal_error( "Directory: $convdatadir: ", 1 ); my @polled = sort grep { /\.polled$/xsm } readdir DATADIR; closedir DATADIR; my $totalpolled = @polled; for my $i ( ( $INFO{'polledfile'} || 0 ) .. ( $totalpolled - 1 ) ) { $file = $polled[$i]; open $POLLEDFILE, '<', "$convdatadir/$file" || setup_fatal_error( "$maintext_23 $convdatadir/$file: ", 1 ); @polledfile = <$POLLEDFILE>; close $POLLEDFILE or croak 'cannot close POLLEDFILE'; chomp @polledfile; @temparray = (); for my $line (@polledfile) { my ( $dummy1, $pollername, $dummy3, $pdate ) = split /[|]/xsm, $line; $pollername = exists $fixed_users{$pollername} ? ${ $fixed_users{$pollername} }[0] : $pollername; $pdate =~ s/(\d{1,2}\/\d{1,2}\/\d{2,4}).*?(\d{1,2}\:\d{1,2}\:\d{1,2})/conv_stringtotime("$1 at $2")/eism; push @temparray, "$dummy1|$pollername|$dummy3|$pdate\n"; } open $POLLEDFILE, '>', "$datadir/$file" || setup_fatal_error( "$maintext_23 $datadir/$file: ", 1 ); print {$POLLEDFILE} @temparray or croak "cannot print $datadir/$file"; close $POLLEDFILE or croak 'cannot close POLLEDFILE'; if ( time() > $time_to_jump && ( $i + 1 ) < $totalpolled ) { $yySetLocation = qq~$set_cgi?action=dates2;st=~ . int( $INFO{'st'} + time() - $time_to_jump + $max_process_time ) . qq~;starttime=$time_to_jump;timeconv=1;totalpolls=$INFO{'totalpolls'};totalpolled=$totalpolled;polledfile=~ . ( $i + 1 ); redirectexit(); } } } return; } # / Date Conversion ## # Cleanup ## sub MyReCountTotals { @boards = sort keys %board; my $totalboards = @boards; for my $j ( ( $INFO{'my_re_tot'} || 0 ) .. ( $totalboards - 1 ) ) { my $cntboard = $boards[$j]; next if !$cntboard; open $BOARD, '<', "$boardsdir/$cntboard.txt" || setup_fatal_error( "$maintext_23 $boardsdir/$cntboard.txt: ", 1 ); my @threads = <$BOARD>; close $BOARD or croak 'cannot close BOARD'; my $threadcount = @threads; my $messagecount = $threadcount; if ($threadcount) { for my $i ( 0 .. $#threads ) { $messagecount += ( split /[|]/xsm, $threads[$i] )[5]; } } BoardTotals( 'load', $cntboard ); ${ $uid . $cntboard }{'threadcount'} = $threadcount; ${ $uid . $cntboard }{'messagecount'} = $messagecount; # &BoardTotals("update", ...) is done in &BoardSetLastInfo BoardSetLastInfo( $cntboard, \@threads ); if ( time() > $time_to_jump && ( $j + 1 ) < $totalboards ) { $yySetLocation = qq~$set_cgi?action=cleanup2;st=~ . int( $INFO{'st'} + time() - $time_to_jump + $max_process_time ) . qq~;starttime=$time_to_jump;clean=1;total_boards=$INFO{'total_boards'};total_re_tot=$totalboards;my_re_tot=~ . ( $j + 1 ); redirectexit(); } } $INFO{'total_re_tot'} = $totalboards; $INFO{'clean'} = 2; return; } sub MyMemberIndex { if ( $INFO{'memb_index'} > 0 ) { ManageMemberlist('load'); ManageMemberinfo('load'); $siglength = $INFO{'siglength'}; } else { $INFO{'tmp_firstforum'} = $INFO{'firstforum'} = conv_stringtotime($forumstart); $siglength = 200; } opendir MEMBERS, $memberdir || setup_fatal_error( "Directory: $memberdir: ", 1 ); @members = sort grep { /.\.vars$/xsm } readdir MEMBERS; closedir MEMBERS; $totalmemb = @members; for my $j ( ( $INFO{'memb_index'} || 0 ) .. ( $totalmemb - 1 ) ) { $member = $members[$j]; $member =~ s/\.vars$//gxsm; LoadUser($member); Recent_Load($member); ${ $uid . $member }{'postcount'} = 0; for ( keys %recent ) { ${ $uid . $member }{'postcount'} += ${ $recent{$_} }[0]; } if ( $INFO{'firstforum'} > ${ $uid . $member }{'regtime'} ) { $INFO{'firstforum'} = ${ $uid . $member }{'regtime'}; } if ( length( ${ $uid . $member }{'signature'} ) > $siglength ) { $siglength = length( ${ $uid . $member }{'signature'} ); } if ( ${ $uid . $member }{'position'} ) { for my $key ( keys %NoPost ) { ( $NoPostname, undef ) = split /[|]/xsm, $NoPost{$key}, 2; if ( ${ $uid . $member }{'position'} eq $NoPostname ) { ${ $uid . $member }{'position'} = $key; last; } } } if ( !${ $uid . $member }{'position'} ) { ${ $uid . $member }{'position'} = MyMemberPostGroup( ${ $uid . $member }{'postcount'} ); } if ( ${ $uid . $member }{'addgroups'} ) { my $newaddigrp = q{}; for my $addigrp ( split /, ?/sm, ${ $uid . $member }{'addgroups'} ) { for my $key ( keys %NoPost ) { ( $NoPostname, undef ) = split /[|]/xsm, $NoPost{$key}, 2; if ( $addigrp eq $NoPostname ) { $addigrp = $key; last; } } $newaddigrp .= qq~$addigrp,~; } $newaddigrp =~ s/,$//xsm; ${ $uid . $member }{'addgroups'} = $newaddigrp; } UserAccount( $member, 'update' ); $memberlist{$member} = sprintf '%010d', ${ $uid . $member }{'regtime'}; $memberinf{$member} = qq~${$uid.$member}{'realname'}|${$uid.$member}{'email'}|${$uid.$member}{'position'}|${$uid.$member}{'postcount'}~; if ( time() > $time_to_jump && ( $j + 1 ) < $totalmemb ) { ManageMemberlist('save'); ManageMemberinfo('save'); $yySetLocation = qq~$set_cgi?action=cleanup2;st=~ . int( $INFO{'st'} + time() - $time_to_jump + $max_process_time ) . qq~;starttime=$time_to_jump;clean=2;total_boards=$INFO{'total_boards'};total_re_tot=$INFO{'total_re_tot'};tmp_firstforum=$INFO{'tmp_firstforum'};firstforum=$INFO{'firstforum'};siglength=$siglength;total_memb=$totalmemb;memb_index=~ . ( $j + 1 ); redirectexit(); } } ManageMemberlist('save'); ManageMemberinfo('save'); $INFO{'total_memb'} = $totalmemb; $INFO{'clean'} = 3; open $MEMBERLISTREAD, '<', "$memberdir/memberlist.txt" || setup_fatal_error( "$maintext_23 $memberdir/memberlist.txt: ", 1 ); my @num = <$MEMBERLISTREAD>; close $MEMBERLISTREAD or croak 'cannot close MEMBERLISTREAD'; my $membertotal = @num; ( $latestmember, undef ) = split /\t/xsm, $num[-1], 2; open $MEMTTL, '>', "$memberdir/members.ttl" || setup_fatal_error( "$maintext_23 $memberdir/members.ttl: ", 1 ); print {$MEMTTL} qq~$membertotal|$latestmember~ or croak "cannot print $memberdir/members.ttl"; close $MEMTTL or croak 'cannot close MEMTTL'; if ( $INFO{'tmp_firstforum'} > $INFO{'firstforum'} || $siglength > 200 ) { SetInstall2(); } return; } sub MyMemberPostGroup { my ($userpostcnt) = @_; $grtitle = q{}; for my $postamount ( reverse sort { $a <=> $b } keys %Post ) { if ( $userpostcnt >= $postamount ) { ( $grtitle, undef ) = split /[|]/xsm, $Post{$postamount}, 2; last; } } return $grtitle; } sub MyMailNotify { require Sources::Notify; ManageMemberinfo('load'); opendir DIRECTORY, $convdatadir || setup_fatal_error( "Directory: $convdatadir: ", 1 ); my @files = sort grep { /\.mail$/xsm } readdir DIRECTORY; closedir DIRECTORY; my $totalfiles = @files; for my $j ( ( $INFO{'my_mail_n'} || 0 ) .. ( $totalfiles - 1 ) ) { my $filename = ( split /\./xsm, $files[$j], 2 )[0]; open $MAILFILE, '<', "$convdatadir/$filename.mail" || setup_fatal_error( "$maintext_23 $convdatadir/$filename.mail: ", 1 ); my @mailaddresses = <$MAILFILE>; close $MAILFILE or croak 'cannot close MAILFILE'; chomp @mailaddresses; for my $mailaddress (@mailaddresses) { while ( ( $curuser, $value ) = each %memberinf ) { if ( $mailaddress eq ( split /[|]/xsm, $value, 3 )[1] ) { ManageThreadNotify( 'add', $filename, $curuser, $language, 1, 1 ); if ( $curuser ne $username ) { undef %{ $uid . $curuser }; } last; } } } if ( time() > $time_to_jump && ( $j + 1 ) < $totalfiles ) { $yySetLocation = qq~$set_cgi?action=cleanup2;st=~ . int( $INFO{'st'} + time() - $time_to_jump + $max_process_time ) . qq~;starttime=$time_to_jump;clean=3;total_boards=$INFO{'total_boards'};total_re_tot=$INFO{'total_re_tot'};total_memb=$INFO{'total_memb'};tmp_firstforum=$INFO{'tmp_firstforum'};firstforum=$INFO{'firstforum'};total_mail_n=$totalfiles;my_mail_n=~ . ( $j + 1 ); redirectexit(); } } $INFO{'total_mail_n'} = $totalfiles; $INFO{'clean'} = 4; return; } sub FixNopost { if ( $NoPost{'1'} ) { open $FORUMCONTROL, '<', "$boardsdir/forum.control" || setup_fatal_error( "$maintext_23 $boardsdir/forum.control: ", 1 ); @boardcontrols = <$FORUMCONTROL>; close $FORUMCONTROL or croak 'cannot close FORUMCONTROL'; for my $set (@boardcontrols) { $set =~ s/[\r\n]//gsm; } chomp @boardcontrols; my $totalnoposts = keys %NoPost; for my $i ( ( $INFO{'fix_nopost'} || 1 ) .. ( $totalnoposts - 1 ) ) { ( $grptitle, undef ) = split /[|]/xsm, $NoPost{$i}, 2; for my $key ( keys %catinfo ) { ( $catname, $catperms, $catcol ) = split /[|]/xsm, $catinfo{$key}, 3; $newperm = q{}; for my $theperm ( split /, /sm, $catperms ) { if ( $theperm eq $grptitle ) { $theperm = $i; } $newperm .= qq~$theperm, ~; } $newperm =~ s/, $//sm; $catinfo{$key} = qq~$catname|$newperm|$catcol~; } for my $key ( keys %board ) { ( $boardname, $boardperms, $boardshow ) = split /[|]/xsm, $board{$key}, 3; $newperm = q{}; foreach my $theperm ( split /, /sm, $boardperms ) { if ( $theperm eq $grptitle ) { $theperm = $i; } $newperm .= qq~$theperm, ~; } $newperm =~ s/, $//sm; $board{$key} = qq~$boardname|$newperm|$boardshow~; } for my $j ( 0 .. $#boardcontrols ) { ( $cntcat, $cntboard, $cntpic, $cntdescription, $cntmods, $cntmodgroups, $cnttopicperms, $cntreplyperms, $cntpollperms, $cntzero, $cntmembergroups, $cntann, $cntrbin, $cntattperms, $cntminageperms, $cntmaxageperms, $cntgenderperms ) = split /[|]/xsm, $boardcontrols[$j]; $newmodgroups = q{}; for my $theperm ( split /, /sm, $cntmodgroups ) { if ( $theperm eq $grptitle ) { $theperm = $i; } $newmodgroups .= qq~$theperm, ~; } $newmodgroups =~ s/, $//sm; $newtopicperms = q{}; for my $theperm ( split /, /sm, $cnttopicperms ) { if ( $theperm eq $grptitle ) { $theperm = $i; } $newtopicperms .= qq~$theperm, ~; } $newtopicperms =~ s/, $//sm; $newreplyperms = q{}; for my $theperm ( split /, /sm, $cntreplyperms ) { if ( $theperm eq $grptitle ) { $theperm = $i; } $newreplyperms .= qq~$theperm, ~; } $newreplyperms =~ s/, $//sm; $newpollperms = q{}; for my $theperm ( split /, /sm, $cntpollperms ) { if ( $theperm eq $grptitle ) { $theperm = $i; } $newpollperms .= qq~$theperm, ~; } $newpollperms =~ s/, $//sm; $boardcontrols[$j] = qq~$cntcat|$cntboard|$cntpic|$cntdescription|$cntmods|$newmodgroups|$newtopicperms|$newreplyperms|$newpollperms|$cntzero|$cntmembergroups|$cntann|$cntrbin|$cntattperms|$cntminageperms|$cntmaxageperms|$cntgenderperms\n~; } if ( time() > $time_to_jump && ( $i + 1 ) < $totalnoposts ) { Write_ForumMaster(); open $FORUMCONTROL, '>', "$boardsdir/forum.control" || setup_fatal_error( "$maintext_23 $boardsdir/forum.control: ", 1 ); print {$FORUMCONTROL} @boardcontrols or croak 'cannot print FORUMCONTROL'; close $FORUMCONTROL or croak 'cannot close FORUMCONTROL'; $yySetLocation = qq~$set_cgi?action=cleanup2;st=~ . int( $INFO{'st'} + time() - $time_to_jump + $max_process_time ) . qq~;starttime=$time_to_jump;clean=4;total_boards=$INFO{'total_boards'};total_re_tot=$INFO{'total_re_tot'};total_memb=$INFO{'total_memb'};tmp_firstforum=$INFO{'tmp_firstforum'};firstforum=$INFO{'firstforum'};total_mail_n=$INFO{'total_mail_n'};total_nopost=$totalnoposts;fix_nopost=~ . ( $i + 1 ); redirectexit(); } } Write_ForumMaster(); open $FORUMCONTROL, '>', "$boardsdir/forum.control" || setup_fatal_error( "$maintext_23 $boardsdir/forum.control: ", 1 ); print {$FORUMCONTROL} @boardcontrols or croak 'cannot print FORUMCONTROL'; close $FORUMCONTROL or croak 'cannot close FORUMCONTROL'; } return; } # / Cleanup ## sub format_timestring { my ($time_string) = @_; if ( $time_string !~ m/(\d{1,2})\/(\d{1,2})\/(\d{2,4}).*?(\d{1,2})\:(\d{1,2})\:(\d{1,2})/ism ) { $time_string = "$forumstart"; } if ( $time_string =~ m/(\d{1,2})\/(\d{1,2})\/(\d{2,4}).*?(\d{1,2})\:(\d{1,2})\:(\d{1,2})/ism ) { $dr_month = $1; $dr_day = $2; $dr_year = $3; $dr_hour = $4; $dr_minute = $5; $dr_secund = $6; } if ( $dr_month > 12 ) { $dr_month = 12; } if ( $dr_month < 1 ) { $dr_month = 1; } if ( $dr_day > 31 ) { $dr_day = 31; } if ( $dr_day < 1 ) { $dr_day = 1; } if ( length($dr_year) > 2 ) { $dr_year = substr $dr_year, length($dr_year) - 2, 2; } if ( $dr_year < 90 && $dr_year > 20 ) { $dr_year = 90; } if ( $dr_year > 20 && $dr_year < 90 ) { $dr_year = 20; } if ( $dr_hour > 23 ) { $dr_hour = 23; } if ( $dr_minute > 59 ) { $dr_minute = 59; } if ( $dr_secund > 59 ) { $dr_secund = 59; } if ( $dr_month == 4 || $dr_month == 6 || $dr_month == 9 || $dr_month == 11 ) { $max_days = 30; } elsif ( $dr_month == 2 && $dr_year % 4 == 0 ) { $max_days = 29; } elsif ( $dr_month == 2 && $dr_year % 4 != 0 ) { $max_days = 28; } else { $max_days = 31; } if ( $dr_day > $max_days ) { $dr_day = $max_days; } $dr_month = sprintf '%02d', $dr_month; $dr_day = sprintf '%02d', $dr_day; $dr_year = sprintf '%02d', $dr_year; $dr_hour = sprintf '%02d', $dr_hour; $dr_minute = sprintf '%02d', $dr_minute; $dr_secund = sprintf '%02d', $dr_secund; return qq~$dr_month/$dr_day/$dr_year $maintxt{'107'} $dr_hour:$dr_minute:$dr_secund~; } sub conv_stringtotime { my ($splitvar) = @_; if ( !$splitvar ) { return 0; } if ( $splitvar =~ m/(\d{1,2})\/(\d{1,2})\/(\d{2,4}).*?(\d{1,2})\:(\d{1,2})\:(\d{1,2})/ism ) { $amonth = int($1) || 1; $aday = int($2) || 1; $ayear = int($3) || 0; $ahour = int($4) || 0; $amin = int($5) || 0; $asec = int($6) || 0; } if ( $ayear >= 36 && $ayear <= 99 ) { $ayear += 1900; } elsif ( $ayear >= 00 && $ayear <= 35 ) { $ayear += 2000; } if ( $ayear < 1904 ) { $ayear = 1904; } elsif ( $ayear > 2036 ) { $ayear = 2036; } if ( $amonth < 1 ) { $amonth = 0; } elsif ( $amonth > 12 ) { $amonth = 11; } else { --$amonth; } if ( $amonth == 3 || $amonth == 5 || $amonth == 8 || $amonth == 10 ) { $max_days = 30; } elsif ( $amonth == 1 && $ayear % 4 == 0 ) { $max_days = 29; } elsif ( $amonth == 1 && $ayear % 4 != 0 ) { $max_days = 28; } else { $max_days = 31; } if ( $aday > $max_days ) { $aday = $max_days; } if ( $ahour < 1 ) { $ahour = 0; } elsif ( $ahour > 23 ) { $ahour = 23; } if ( $amin < 1 ) { $amin = 0; } elsif ( $amin > 59 ) { $amin = 59; } if ( $asec < 1 ) { $asec = 0; } elsif ( $asec > 59 ) { $asec = 59; } return timegm( $asec, $amin, $ahour, $aday, $amonth, $ayear ); } #End Conversion# sub tempstarter { return if !-e "$vardir/Settings.pm"; $YaBBversion = 'YaBB 2.6.12'; # Make sure the module path is present push @INC, "$script_root/Modules"; if ( $ENV{'SERVER_SOFTWARE'} =~ /IIS/sm ) { $yyIIS = 1; if ( $PROGRAM_NAME =~ m{(.*)(\\|/)}xsm ) { $yypath = $1; } $yypath =~ s/\\/\//gxsm; chdir $yypath; push @INC, $yypath; } # Requirements and Errors require Variables::Settings; if ( -e "$vardir/convSettings.txt" ) { require "$vardir/convSettings.txt"; } else { $convertdir = "$script_root/Convert"; } LoadCookie(); # Load the user's cookie (or set to guest) LoadUserSettings(); WhatTemplate(); WhatLanguage(); require Sources::Security; WriteLog(); return; } sub CreateConvLock { my $lockfile = q~This is a lockfile for the Convert Utility. It prevents it being run again after it has been run once. Delete this file if you want to run the Convert Utility again.~; open $LOCKFILE, '>', "$vardir/Converter.lock" || setup_fatal_error( "$maintext_23 $vardir/Converter.lock: ", 1 ); print {$LOCKFILE} $lockfile or croak 'cannot print to LOCKFILE'; close $LOCKFILE or croak 'cannot close LOCKFILE'; return; } sub SetupImgLoc { if ( !-e "$htmldir/Templates/Forum/$useimages/$_[0]" ) { $thisimgloc = qq~img src="$yyhtml_root/Templates/Forum/default/$_[0]"~; } else { $thisimgloc = qq~img src="$imagesdir/$_[0]"~; } return $thisimgloc; } sub tabmenushow { # used by the converter $tabsep = q{ }; $tabfill = q{ }; $NavLink1 = qq~$tabfill Members $tabfill~; $NavLink2 = qq~$tabsep$tabfill Boards & Categories $tabfill~; $NavLink3 = qq~$tabsep$tabfill Messages $tabfill~; $NavLink4 = qq~$tabsep$tabfill Date & Time $tabfill~; $NavLink5 = qq~$tabsep$tabfill Clean Up $tabfill~; $NavLink6 = qq~$tabsep$tabfill Login $tabfill$tabsep ~; $NavLink1a = qq~$tabfill Members $tabfill~; $NavLink2a = qq~$tabsep$tabfill Boards & Categories $tabfill~; $NavLink3a = qq~$tabsep$tabfill Messages $tabfill~; $NavLink4a = qq~$tabsep$tabfill Date & Time $tabfill~; $NavLink5a = qq~$tabsep$tabfill Clean Up $tabfill~; $NavLink6a = qq~$tabsep$tabfill Login $tabfill$tabsep ~; $ConvDone = q~
100 %
~; $ConvNotDone = q~
0 %
~; return; } sub FoundConvLock { tempstarter(); tabmenushow(); $yytabmenu = $NavLink1 . $NavLink2 . $NavLink3 . $NavLink4 . $NavLink5 . $NavLink6; $formsession = cloak("$mbname$username"); $yymain = qq~
| YaBB 2.6.12 Converter | |
|
|
Converter has already been run, attempting to run them again will cause damage to your files. To run Converter again, remove the file "$vardir/Converter.lock," then re-visit this page. |
| An Error Has Occurred! |
$e |
$yymain
~ or croak 'cannot print output screen';
exit;
}
sub SetupTemplate {
$gzcomp = fileno $GZIP ? 1 : 0;
print_output_header();
$yyposition = $yytitle;
$yytitle = "$mbname - $yytitle";
$yyimages = $imagesdir;
$yydefaultimages = $defaultimagesdir;
$yystyle =
qq~\n\n ~;
$yystyle =~ s/$usestyle\///gxsm;
$yytemplate = "$templatesdir/$usehead/$usehead.html";
open $TEMPLATE, '<', "$yytemplate"
|| setup_fatal_error( "$maintext_23 $yytemplate: ", 1 );
@yytemplate = <$TEMPLATE>;
close $TEMPLATE or croak 'cannot close TEMPLATE';
my $output = q{};
$yyboardname = $mbname;
$yytime = timeformat( $date, 1 );
$yyuname =
$iamguest ? q{} : qq~$maintxt{'247'} ${$uid.$username}{'realname'}, ~;
if ($enable_news) {
open $NEWS, '<', "$vardir/news.txt";
@newsmessages = <$NEWS>;
close $NEWS or croak 'cannot close news';
}
for my $i ( 0 .. $#yytemplate ) {
$curline = $yytemplate[$i];
if ( !$yycopyin && $curline =~ m/{yabb\ copyright}/xsm ) {
$yycopyin = 1;
}
if ( $curline =~ m/{yabb\ newstitle}/xsm && $enable_news ) {
$yynewstitle =
qq~$maintxt{'102'}: ~;
}
if ( $curline =~ m/{yabb\ news}/xsm && $enable_news ) {
srand;
if ( $shownewsfader == 1 ) {
$fadedelay = ( $maxsteps * $stepdelay );
$yynews .= qq~
~;
}
else {
$message = $newsmessages[ int rand @newsmessages ];
if ($enable_ubbc) {
enable_yabbc();
DoUBBC();
}
$message =~ s/\x27/&\x2339;/xsm;
$yynews = qq~
~;
}
}
$yyurl = $scripturl;
$curline =~ s/{yabb\s+(\w+)}/${"yy$1"}/gxsm;
$curline =~ s/